What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 03.07.2025 04:55
There are two important concepts here.
At least they know the answer if they wanted it.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Now when you have a certain ac resistance, then a current flows in a loop.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This one hit behind the barn.
The MOV will conduct when the voltage exceeds 50% of line voltage.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Horoscope for Saturday, June 07, 2025 - Chicago Sun-Times
A circuit breaker is similar, but is resettable.
For this case there are devices called Metal oxide varistors (MOV).
This is where this question deviates from being a 'generic' question, and becomes more specific.
Samsung may soon open One UI 8 beta program for Galaxy S22 - SamMobile
what exactly is a ‘surge’ protector?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Astronomers Just Discovered The Biggest Explosions Since The Big Bang - ScienceAlert
A fuse is a non-resetable over current circuit protector.
But it can get overloaded, and no longer works.
What does a fuse do?
Is sunscreen toxic? The UV truthers on the internet sure think so. - The Boston Globe
but this device (an Inductor) … impedes the rapid changes in the current.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Here is a simplified AC power diagram.
Which animal has the best sense of smell? - Live Science
There are three different concepts here that are getting confused.
An AC voltage/ current source, and an ac inductive load.
The bolt then partially travels down the line to your home.
How Moderna Went From Pandemic Hero to Vaccine Victim - WSJ
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This device then solves the entire problem.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
The #1 Herb for Better Gut Health, According to Dietitians - EatingWell
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is 'the assistant's answer'
Edit 2024–10.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
So, the voltage could go up to 500 volts, and the fuse will not open up.
the problem then depends on "how fast does the fuse operate?".
What are the most shocking facts about the Bollywood industry?
Barnstars:
2024–10–16 [ OO OLAOYE OYEBODE ]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
[image of Common-mode choke]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
but I think this circuit , shows a few more pieces.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
One
eight
so, what happens?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–10–10[John johnson John Johnson ]
It seems Mohan does not understand the difference between a comment and an Answer.
What is lightning?
[old diagram got deleted by accident]
These devices are installed between the “hot” and “neutral” and protective ground.
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
a photo is worth a thousand words.
It also is a device that limits the change in current flow.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Because the load is inductive, the current lags the voltage.(by a bit).
nine
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
I post the exact comment here.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
(Dc diagram shown, AC is similar).
First Sentence:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
He then asserts :
Upvotes:
This is where the MOV conducts again, and dissipated the energy.
At one ohm, the resistor has a maximum of 1 watt power.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
He then describes the function of a fuse.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
The third is lightning and “how it gets conducted into a home.”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–14 [Omar Gharbi Omar Gharbi ]
But… the neutral is now “floating” because of the 1 ohm resistance.
He then describes Rainy Season and Lightning.
The other is “what does a “fuse” do?”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
In schematic diagrams this is the symbol for a fuse: